DECKING

The Decking is produced in our mill from redwood softwood which is machined into a section with a grooved face on each side of the board. Providing a choice of which way up to lay the decking.

Although the decking shown above is proving very popular some of our customers have requested that we produce a smaller alternative profile.

Consequently we provide Osmose pressure treated Ripple Decking using very high quality redwood softwood. This decking profile is smooth on the reverse and can be fitted that way up if required.

The finished dimensions of Ripple Decking are approx 19mm x 95mm and is available in 3.6m lengths

The latest addition to our decking range is smooth both sides with four pencil round edges. It is produced from Redwood softwood and is Osmose pressure treated.

The finished dimensions of this smooth decking are approx 26mm x 144mm Lengths :- available in 4.5, 4.8m, 5.1m and 5.4m (subject unsold - please enquire)

This decking board is grooved one side and smooth the other. It is produced from Redwood softwood and is Osmose pressure treated. The dimensions are approx 34mm x 120mm. It is produced to order and the lengths are subject to what is available at the time of order.

Click the Deck Gallery to see completed decks installed by our customers

Also available are the associated treated timber (battens,joists,etc) which form the structure for your deck

Stock sizes for deck joists are:-

3.9m & 4.8m lengths of 47 x 100
4.2m & 4.8m lengths of 47 x 150

We can produce these in the lengths and sizes you require, subject to the constraints of what is physically possible and time.

Decking screws, Stains to colour the decking , Seasonite , Rystix and cut-end treatment also available

These panels are pressure treated (green)

Dimensions :-

1140mm x 762mm (45"width x 30"high)

Seasonite New Wood Protection is ideal for decking. It settles the timber down in the external environment and helps with the potential issue of warping and splitting.

LARGE METAL DECK PANELS
Three new stylish ironwork panels that simply screw between timber posts.

Designed to create a new and fresh effect to the deck, and so easy to fit. Many more customers will now have the confidence to carry out this kind of project.
813mm tall and fitting a 1130mm gap, each panel has a 40mm (1½") wide toprail which provides a new all metal look. The panels can also be drilled to accommodate standard timber handrails. Each panel comes with four screw on brackets, nuts and bolts. Finished in black, they require a final coat of gloss paint.

SMALL METAL DECK PANELS

Bali Silver Colour Small Metal Panels designed to screw to timber top and base rail (770mm high x 560mm wide). Supplied in packs of 2 panels.	Java Black Colour Small Metal Panels designed to screw to timber top and base rail (770mm high x 560mm wide). Supplied in packs of 2 panels.
Minimum order for Bali or Java 4 Packs (i.e. 8 panels) (7-10 days availability)
Metro Black Colour Small Metal Panels designed to screw to timber top and base rail (770mm high x 280 mm wide). Supplied in packs of 4 panels.	Plaza Silver Colour Small Metal Panels designed to screw to timber top and base rail (770mm high x 280 mm wide). Supplied in packs of 4 panels.
Minimum order for Metro or Plaza 4 Packs (i.e.16 panels) (7-10 days availability)